Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Dacia Logan and Sandero

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Front bumper

To remove a bumper, you need to unscrew all the bolts that secure it or the clips that hold it in place. Start by unscrewing the lower bolts, which are located under the vehicle and beneath the bumper itself, and are clearly shown in the video. Then unscrew all the bolts securing it at the top, but it doesn't end here, as you will also need to check for bolts securing it in the hidden area of the two wheel arches. Remember to work slowly while removing a bumper from the vehicle to avoid damaging the car's fittings. To install the new bumper, simply re-screw all the bolts.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
Disassembly of the front bumper of the Dacia Logan 1
Disassembly of the front bumper of the Dacia Logan 1
Dacia Logan (2004-2012 / MK 1) Let's see how to proceed in case we need to remove the front bumper of the Dacia Logan, for maintenance: we start by opening the hood of the engine c…
How to Replace the Horn Lever on the Dacia Logan - Sandero
How to Replace the Horn Lever on the Dacia Logan - Sandero
Dacia Logan (2004-2012 / MK 1) In this short guide, you will learn how to remove and replace the horn lever or sound signal lever on the Dacia Logan, as well as on the Sandero and …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos