Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the bonnet of the Dacia Logan

Model: Dacia Logan MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Body

See other generations:
Video tutorial

This guide briefly outlines the steps to open the front bonnet of the Dacia Logan, as well as the Sandero. First, open the driver's side front door and start pulling the bonnet release lever located at the bottom of the pillar; then move to the front of the bonnet and unclip the lever found in the centre, between the bonnet and the bumper grille, as shown in the video.

This will allow you to secure the bonnet with the prop rod, lowering it to close it again!


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to replace the timing belt on the Dacia Logan?
How to replace the timing belt on the Dacia Logan?
Dacia Logan (2012-2022 / MK 2) To replace the timing belt on the Dacia Logan, open the bonnet to access the components inside the engine compartment: you will also need to lift the…
Guide to Replacing the Timing Belt on a Dacia Logan 1.6
Guide to Replacing the Timing Belt on a Dacia Logan 1.6
Dacia Logan (2004-2012 / MK 1) The following instructions will outline the main steps on how to remove and replace the timing belt on a Dacia Logan 1.6. First, open the engine bonn…
How to replace the headlight bulb on the Dacia Logan?
How to replace the headlight bulb on the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) To replace the headlight bulb on the Dacia Logan, you will need to open the bonnet to access the cover panel inside the headlight: once this panel is…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos