Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on the Dacia Logan?

Model: Dacia Logan MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on the Dacia Logan, open the bonnet to access the components inside the engine compartment: you will also need to lift the car and remove the right front wheel to access the side of the engine block. The belt can now be removed by loosening the central nut of the tensioner pulley: once this is removed, reduce the tension of the belt, insert the new one, and reassemble all removed components to verify correct operation.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
Where is the OBD2 port located in the Dacia Logan?
Where is the OBD2 port located in the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In the following guide you will find the description of all the steps you need to follow to easily find the OBD2 port located inside the cabin of you…
Guide to Replacing the Timing Belt on the Dacia Logan 1.5 dCi
Guide to Replacing the Timing Belt on the Dacia Logan 1.5 dCi
Dacia Logan (2004-2012 / MK 1) This brief guide shows how to remove and replace the timing belt on the Dacia Logan 1.5 dCi. First, open the bonnet and begin by removing the engine …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos