Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on a Dacia Logan 1.6

Model: Dacia Logan MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

The following instructions will outline the main steps on how to remove and replace the timing belt on a Dacia Logan 1.6. First, open the engine bonnet and begin by removing the engine mount on the timing side; in this case, the entire engine block is removed, which is not necessary for replacing the timing belt.

Raise the vehicle and disconnect the serpentine belt, then remove the crankshaft pulley; take off the timing cover to access the belt, installing the new one; check the condition of all other timing components.


Posted on 2 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Dacia Logan 1.5 dCi
Guide to Replacing the Timing Belt on the Dacia Logan 1.5 dCi
Dacia Logan (2004-2012 / MK 1) This brief guide shows how to remove and replace the timing belt on the Dacia Logan 1.5 dCi. First, open the bonnet and begin by removing the engine …
How to replace the timing belt on the Dacia Logan?
How to replace the timing belt on the Dacia Logan?
Dacia Logan (2012-2022 / MK 2) To replace the timing belt on the Dacia Logan, open the bonnet to access the components inside the engine compartment: you will also need to lift the…
How to Change the Timing Belt, Alternator Belt, and Water Pump on a Dacia Logan MCV 1.5
How to Change the Timing Belt, Alternator Belt, and Water Pump on a Dacia Logan MCV 1.5
Dacia Logan (2012-2022 / MK 2) To change these important components, start by removing the front left wheel. Before mounting the jack, unscrew the bolts, then lift the vehicle. Rem…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos