Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Timing belt

Dacia Logan - Timing belt

Dacia Logan (2012-2022 / MK 2)
How do you replace the timing belt of the Dacia Logan?
In order to replace the timing belt of the Dacia Logan, you need to open the hood so that you can access the components inside the engine compartment: you will …read all…
Posted on 5 April 2024 by ScegliAuto
Dacia Logan (2012-2022 / MK 2)
How to change the timing belt, alternator belt, and water pump on a Dacia Logan mcv 1.5.
To change these important components, we begin by removing the left front wheel. Before mounting the jack, unscrew the bolts, then lift the car. Remove the …read all…
Posted on 6 April 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos