Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Tail light

Dacia Logan - Tail light

Dacia Logan (2012-2022 / MK 2)
Rear light replacement on Dacia Logan
Open the tailgate of the boot and unscrew the small knobs located in the inner sheet of the boot itself, obviously those on the side of the headlight …read all…
Posted on 4 January 2024 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
Dacia Logan rear light bulb replacement
Open the boot lid. Unscrew the two black screws on the side of the affected lighthouse by hand, as shown in the video. Detach the light from its seat, then …read all…
Posted on 1 January 2024 by ScegliAuto
Dacia Logan (2012-2022 / MK 2)
Removal of the rear light Dacia Logan, Sandero
In this video tutorial we will see how to remove the rear light on a Dacia Logan, but also on other models of the manufacturer. First we open the boot lid and …read all…
Posted on 23 December 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
Change rear light bulb on Dacia Logan
Is the rear light on Dacia Logan damaged? Do we want to change the bulbs? Let's see how to do it. Let's open the tailgate, let's put it in safety. We unscrew …read all…
Posted on 3 December 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos