Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : -board computer

Dacia Logan - -board computer

Dacia Logan (2004-2012 / MK 1)
How to reset the service on Dacia Logan
After having replaced the oil and filter required by the maintenance coupon, it is necessary to update and reset the signal on the instrument panel. To do …read all…
Posted on 10 April 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
How to reset the TPMS warning light on the Dacia Logan
If when you start your Dacia Logan you notice the appearance of an alarm message relating to low tire pressure, do not worry because very often it is a simple …read all…
Posted on 16 April 2024 by ScegliAuto
Dacia Logan (2012-2022 / MK 2)
Replacement of the medianav on Renault and Dacia cars
Although in the video there is a Dacia Logan, please note that the disassembly of the on-board / navigated computer "medianav" is identical on all the cars …read all…
Posted on 4 April 2024 by ScegliAuto
Dacia Logan (2012-2022 / MK 2)
How to reset the oil warning light on Renault Sandero
If an oil warning light has appeared on your car's on-board computer mini display, don't worry as it can be removed easily and at no cost. First, turn off the …read all…
Posted on 31 March 2024 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos