Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Light bulb

Dacia Logan - Light bulb

Dacia Logan (2012-2022 / MK 2)
How to replace the taillight and the third brake light bulb of the Dacia Logan
Below we will see the procedure for disassembling and replacing the third brake light and its bulbs on the Dacia Logan, as well as the Sandero. First, open the …read all…
Posted on 18 March 2024 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
How to replace the hot air bulb of the 2007 Dacia Logan.
With the help of this short video tutorial, we will explain how to replace the hot air bulb of a 2007 Dacia Logan. The first thing to do is to use a plastic …read all…
Posted on 4 November 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
How to replace the bulb in the central locking in a Dacia Logan
In this video tutorial we can see how it is possible to replace the central locking bulb in a Dacia Logan, by following a few simple steps: if you have noticed …read all…
Posted on 23 September 2022 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
How to replace the headlight bulb on the Dacia Logan?
In order to replace the headlight bulb on the Dacia Logan, you need to open the hood to access the engine compartment and locate the circular cover on the rear …read all…
Posted on 26 March 2024 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos