Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light and Bulb on the Dacia Logan

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Light bulb

Follow the procedure for removing and replacing the third brake light and its bulbs on the Dacia Logan, as well as the Sandero. First, open the boot lid and press on the inside of the light unit to remove the bulbs for the third brake light; then replace them with new bulbs that have the same fitting, as shown in the video. If necessary, replace the entire third brake light unit by disconnecting the electrical connector and securing the new one, following the video tutorial to the end!

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light Bulb on the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) To replace the third brake light bulb on the Dacia Logan, open the tailgate to access the components inside the boot: from the top, you will locate t…
Changing Rear Bulb on Dacia Logan
Changing Rear Bulb on Dacia Logan
Dacia Logan (2004-2012 / MK 1) Is the rear headlamp on your Dacia Logan damaged? Do you want to change the bulbs? Here's how to do it. Open the tailgate and secure it. Unscrew the …
How to replace the headlight bulb of the Dacia Logan
How to replace the headlight bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) If you want to replace the front headlight bulb of your Dacia Logan on your own, all you need to do is read the following guide and follow the descri…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos