Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front bulbs of the Dacia Logan 1

Model: Dacia Logan MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

In this video, we will see how to change the front lights of the Dacia Logan MK1. We open the hood: we can change the H4 bulb of the high beams and low beams by disconnecting the power connector and then removing the dust cover. The bulb is held in place by a metal spring, and we will have to push and pull to the right at the same time to remove it. We take the new bulb - remember to never touch the bulb with bare hands, or we will shorten its lifespan - put back the metal spring, then the rubber cover, and finally the electrical connector.

Now we find the parking light, which is located under the H4; we follow the same procedure, then move on to the turn signals; we turn the support clockwise and pull out the bulb, pushing it and making it turn a quarter turn; to reassemble it, we do the operation in reverse.


Posted on 3 February 2025 by ScegliAuto


Related tutorials

How to Change the Rear Light Bulb on a Dacia Logan
How to Change the Rear Light Bulb on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Here's how to replace the front light bulbs on a Dacia Logan. Lift the front bonnet. Using a screwdriver, remove the plastic cover that conceals the …
Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
How to disassemble the front headlight of the Dacia Logan
How to disassemble the front headlight of the Dacia Logan
Dacia Logan (2004-2012 / MK 1) The following steps will show us how to disassemble and replace the front headlight of the Dacia Logan. First, we open the vehicle's hood and start r…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos