Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to change the rear light bulb on dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Headlight bulb
Operation: How to change the rear light bulb on dacia Logan

Let's see how to replace the headlight bulbs on Dacia Logan. We raise the front hood. With a screwdriver we remove the plastic cap that covers the headlight (if present). Once the covering plastic has been removed, let's disconnect the bulbs (with a pliers) placed in the metal lamp holder (inside the headlight). We replace damaged headlight bulbs (bulbs of the same size and voltage, better if quality). Finally we go to reassemble the inspection cover of the headlight and proceed to check the operation of the bulbs replaced previously.


Posted on 28 November 2023 by ScegliAuto



Change rear light bulb on Dacia Logan
Dacia Logan (2004-2012 / MK 1) Is the rear light on Dacia Logan damaged? Do we want to change the bulbs? Let's see how to do it. Let's open the tailgate, let's put it in safety. We
How do you replace the third brake light bulb on your Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the third stop light bulb on your Dacia Logan, you need to open the tailgate, so that you can access the components located insid
How to replace the headlight bulb on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) It often happens that a headlight bulb strikes, but there is no need to worry because with a little foresight you can change it yourself, specificall

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos