Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Change rear light bulb on Dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Tail light
Operation: Change rear light bulb on Dacia Logan

Is the rear light on Dacia Logan damaged? Do we want to change the bulbs? Let's see how to do it. Let's open the tailgate, let's put it in safety. We unscrew the tightening screws of the rear light. Unscrew the headlight tightening nuts (located in the rear part of the luggage compartment side headlight). We disassemble the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We always install new bulbs of the same type and size as the old ones. We insert the lamp holder in the lighthouse housing. We mount the headlight with tightening nuts. Let's test how it works.


Posted on 3 December 2023 by ScegliAuto



How do you replace the third brake light bulb on your Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the third stop light bulb on your Dacia Logan, you need to open the tailgate, so that you can access the components located insid
How to replace the headlight bulb on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) It often happens that a headlight bulb strikes, but there is no need to worry because with a little foresight you can change it yourself, specificall
How to replace the headlight bulb on the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the headlight bulb on the Dacia Logan, you need to open the hood to access the engine compartment and locate the circular cover o

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos