Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Airbags

Dacia Logan - Airbags

Dacia Logan (2012-2022 / MK 2)
How to remove the airbag from the 2019 Dacia Logan
Today with the help of this short video tutorial, we will explain how to remove the airbag from the steering wheel of a 2019 Dacia Logan. Since this is a …read all…
Posted on 11 March 2024 by ScegliAuto
Dacia Logan (2012-2022 / MK 2)
How to disassemble and reassemble the passenger airbag on the Dacia Logan and Sandero.
In this video, we see how to disassemble and reassemble the passenger airbag on the Dacia Logan; but the same procedure is also used for the Sandero. It is not …read all…
Posted on 24 August 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos