Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Dacia Logan - Arm

Dacia Logan (2004-2012 / MK 1)
How to replace the swing arm on a Dacia Logan
How to replace the swing arm on a Dacia Logan? Let's see how to remove the front arm. We put the car on a column bridge and loosen the wheel pins with a …read all…
Posted on 21 November 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
Anti roll bar head replacement
The anti-roll bar is connected to the oscillating arm of the suspension by means of a head with a rubber insert that usually tends to yield, making driving …read all…
Posted on 10 September 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
Suspension swing arm replacement
The replacement of the swinging arm of the front suspension is very easy to carry out: lift the car on the lift and remove the front wheel; start by …read all…
Posted on 8 September 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
How to replace the front wheel arm.
Place the car on the bridge and raise it to a comfortable height to work on the wheel. Remove the front wheel. Find the position of the arm and unscrew the …read all…
Posted on 5 September 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos