Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to replace the swing arm on a Dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Arm
Operation: How to replace the swing arm on a Dacia Logan

How to replace the swing arm on a Dacia Logan? Let's see how to remove the front arm. We put the car on a column bridge and loosen the wheel pins with a telescopic wrench; we lift the car to a comfortable height and take off the circle. Using a socket wrench, unscrew the lower locking pin of the arm and the pin mounted under the wheel hub. We unscrew the pins of the upper arm (as in the video). We remove the arm from the pin seat. We always compare the parts to be replaced with new ones, if they are suitable, we can assemble them. Now let's start assembling the new piece: insert the arm at the two ends of the guides and tighten all the pins and pieces (wheel).


Posted on 21 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos