Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fit the spare wheel on a Dacia Sandero

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Wheel

See other generations:
Video tutorial

To fit the spare wheel on a Dacia Sandero, park on a flat surface, engage the handbrake, and turn off the engine. Retrieve the spare wheel, jack, and wheel nut key, then slightly loosen the nuts of the wheel to be replaced without removing them.

Position the jack at the designated lifting point under the chassis, near the affected wheel, and lift the car until the tyre is no longer touching the ground. Completely unscrew the nuts and remove the wheel.

Place the spare wheel onto the hub, align the holes, and hand-tighten the nuts. Lower the vehicle until the wheel is resting on the ground, remove the jack, and tighten the nuts diagonally.

Finally, store the removed wheel and tools in their designated compartments and check the pressure of the fitted wheel as soon as possible.


Posted on 7 September 2026 by ScegliAuto


Related tutorials

How to Install a Sat Nav on Dacia Sandero
How to Install a Sat Nav on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Want to install a sat nav on a Dacia Sandero? Let's remove the radio from the centre console. Remove the stereo trim with a plastic lever (under wher…
Replacing Brake Pads on Dacia Sandero
Replacing Brake Pads on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Replace the front brake pads on a Dacia Sandero. Lift the car on a column lift to the desired height. Remove the wheel using a telescopic spanner or …
…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos