Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Brake pads

Replace the front brake pads on a Dacia Sandero. Lift the car on a column lift to the desired height. Remove the wheel using a telescopic spanner or air drill, along with the respective bolts. Unscrew the caliper locking bolt and remove the caliper from the wheel hub. Use a screwdriver to detach the pads from the wheel hub caliper and remove the caliper from the brake. Fit the new brake pads into the caliper and refit the caliper. Tighten all bolts and refit the wheel. Prepare to perform the same operations on the other calipers on the Dacia.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on a Dacia Sandero
Replacing Front Brake Pads on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Replacing the brake pads is a maintenance task that can be easily done yourself; the first recommendation is to secure the vehicle once lifted, using…
Replacing Front Brake Pads on Dacia Sandero
Replacing Front Brake Pads on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Replacing the brake pads is a maintenance task that can be easily done yourself; start by lifting the vehicle to remove the front wheel: if using the…
Replacing Brake Pads on Dacia Sandero
Replacing Brake Pads on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Are the front brake pads worn and in need of replacement? Here’s how to proceed. Lift the car on a column lift to the desired height, then remove the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos