Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Tyre Inflator Compressor on the Dacia Sandero Stepway

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Wheel

In this video, you will see how to use the tyre inflator compressor that now comes with most Dacia Sandero Stepways. This device will be useful when the side cut does not exceed 4 mm. To perform this repair, the vehicle must be on a level surface and in a safe location, with hazard lights on and the handbrake engaged. You will need to attach the compressor to the liquid bottle, connecting it to the hose, then fit the bottle and attach the hose to the tyre. Next, connect the power cable to the console connector. Then start the engine so that the compressor can run. It is advisable to check the tyre pressure value on the label inside the driver's door. If, after 15 minutes, the pressure is not reached, the repair cannot be performed. After the repair is completed, drive for about three miles at a maximum speed of 37 mph, and then recheck the pressure. Contact an authorised repairer as soon as possible.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to use the inflation kit on the Dacia Sandero
How to use the inflation kit on the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) In this video we will see how to correctly use the inflation kit of the Dacia Sandero Stepway: If the tire puncture did not occur on the sidewall and…
How do you reset the tire pressure warning light on the Dacia Sandero Stepway?
How do you reset the tire pressure warning light on the Dacia Sandero Stepway?
Dacia Sandero (2021-2026 / MK 3) To reset the tire pressure warning light of the Dacia Sandero Stepway, you need to inflate the tires until they reach the recommended pressure value:…
How do you reset the tire pressure warning light on the Dacia Sandero Stepway?
How do you reset the tire pressure warning light on the Dacia Sandero Stepway?
Dacia Sandero (2021-2026 / MK 3) It will be possible to turn off the tire pressure warning light on the instrument panel of the Dacia Sandero Stepway by first inflating the tires: th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos