Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to replace the front wheel arm.

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Arm
Operation: How to replace the front wheel arm.

Place the car on the bridge and raise it to a comfortable height to work on the wheel. Remove the front wheel. Find the position of the arm and unscrew the bolt furthest away from it. At this point unscrew the bolt that connects it to the wheel and remove it from its position after having completely unscrewed it along its axis from the base. Replace the bolt along the base and place the new arm in the same position as the old one. The operations to be performed are the same as the views performed in reverse. Fit the tire and lower the car. The operation is performed on a Dacia Logan.


Posted on 5 September 2023 by ScegliAuto



How to replace the swing arm on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) How to replace the swing arm on a Dacia Logan? Let's see how to remove the front arm. We put the car on a column bridge and loosen the wheel pins wit
Suspension swing arm replacement
Dacia Logan (2004-2012 / MK 1) The replacement of the swinging arm of the front suspension is very easy to carry out: lift the car on the lift and remove the front wheel; start by
Anti roll bar head replacement
Dacia Logan (2004-2012 / MK 1) The anti-roll bar is connected to the oscillating arm of the suspension by means of a head with a rubber insert that usually tends to yield, making d

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos