Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Spark plugs

Dacia Logan - Spark plugs

Dacia Logan (2012-2022 / MK 2)
Dacia Logan 0.9 TCe engine spark plugs replacement
In this video tutorial we will see the main steps to be able to remove and replace the spark plugs of the engine of a Dacia Logan motorized 0.9 TCe, …read all…
Posted on 12 February 2024 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
How to replace the spark plugs on the Dacia Logan
Prepare the necessary tools and then unhook the hood from the special lever and lift it to fix it with the special rod, now you can remove the injectors from …read all…
Posted on 3 October 2023 by ScegliAuto
Dacia Logan (2004-2012 / MK 1)
Spark plug replacement and maintenance
A simple replacement that will save you time and money at the mechanic. Open and lift the hood and you can see the connectors that give power to the spark …read all…
Posted on 20 September 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Shock absorbers (3) Antenna (1) Car stereo (7) Battery (1) Bushings (1) Arm (4) Spark plugs (3) Key (3) Timing belt (2) -board computer (4) Checks and maintenance (28) Headlight (1) Tail light (4) Air filter (3) Cabin air filter (7) Light bulb (4) Headlight bulb (9) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (1) Third brake light (1) Door panel (5) Front bumper (1) Brake pads (2) Tires (1) Gear Shift Knob (1) Instrument cluster (4) Fuse box (9) Outside rearview mirror (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos