Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Dacia Logan MK1 Petrol

Model: Dacia Logan - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Spark plugs

See other generations:
Video tutorial

Learn how to change the spark plugs on a Dacia Logan MK1 petrol: you can find the 4 Bosch spark plugs on Amazon with the code B00AA164KE for £20.49, with free delivery. Open the bonnet and locate the coils with their wires: pull off the coil (but not by the wire, as it may get damaged).

Clean the spark plug housing with a thin plastic tube attached to a vacuum cleaner, then insert a 16 mm socket with an extension into the hole, unscrew it with the spanner and remove it. Take the new spark plug, insert it into the housing and hand-tighten it for the first few turns to avoid damaging the thread, then tighten to 25/30 Nm. Refit the coil and repeat for the other spark plugs.

It is important to change one spark plug at a time and close the well to prevent dirt from falling into the engine.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

Replacing Spark Plugs on a Dacia Logan 0.9 TCe
Replacing Spark Plugs on a Dacia Logan 0.9 TCe
Dacia Logan (2012-2022 / MK 2) In this video tutorial, you will see the main steps to remove and replace the spark plugs on a Dacia Logan with a 0.9 TCe engine, a three-cylinder tu…
Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
How to Replace the Front Headlight Bulb of a Dacia Logan 2015
How to Replace the Front Headlight Bulb of a Dacia Logan 2015
Dacia Logan (2012-2022 / MK 2) If one of the front headlights of your Dacia Logan second series (2015 model) has a faulty bulb and you want to replace it yourself, follow the proce…

How to Fix Code 84 Issue on the Chevrolet Cruze

In this video, you will see how to resolve the Code 84 issue when it appears on the instrument panel of the Chevrolet Cruze. The YouTuber uses an OBDII scanner connected to the EOBD port to correctly decode the error, which relates to the accelerator pedal that does not respond during engine acceleration. The solution is to check the throttle body, which helps send fuel to accelerate the vehicle; it was indeed damaged, and once replaced, the error code is cleared, allowing the vehicle to accelerate normally again.

Watch the video!


by ScegliAuto

More videos