Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement and Maintenance

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Spark plugs

A simple replacement that will save you time and money at the garage. Open and lift the bonnet, and you will see the connectors supplying power to the spark plugs in the centre of the engine. Simply remove them by pulling towards you. Using a socket, unscrew the spark plugs located in the holes from which you disconnected the connectors, quite easily. Now, take the new spark plugs and insert them into their housing, tightening them with the same socket of the same size used to remove the old ones. Reconnect the connectors, and you're done!

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on a Dacia Logan 0.9 TCe
Replacing Spark Plugs on a Dacia Logan 0.9 TCe
Dacia Logan (2012-2022 / MK 2) In this video tutorial, you will see the main steps to remove and replace the spark plugs on a Dacia Logan with a 0.9 TCe engine, a three-cylinder tu…
How to Replace the Spark Plugs on a Dacia Logan
How to Replace the Spark Plugs on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Gather the necessary tools and then release the bonnet from the designated lever and lift it to secure it with the appropriate prop. Now you can remo…
How to reset the service light on the 2008 Dacia Logan
How to reset the service light on the 2008 Dacia Logan
Dacia Logan (2004-2012 / MK 1) The procedure for resetting the service light related to the car service on a 2008 Dacia Logan is simple and quick to perform independently. To proce…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos