Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Bulbs in Dacia Logan Rear Light

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Tail light

Open the boot lid. Manually unscrew the two black screws located at the side of the affected light, as shown in the video. Detach the light unit from its housing, then disconnect the connector by pressing the appropriate tab (not the wires!) and pulling. At this point, remove the lower cover, which is simply clipped into the rest of the assembly, separating it into two parts. You will notice that the various bulbs (indicator, dipped beam, and brake light) are fixed to the removed cover. Unscrew the bulb to be replaced and screw in the new one you purchased. Reassemble everything in reverse order.

Updated on 1 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Third Brake Light and Bulb on the Dacia Logan
How to Replace the Third Brake Light and Bulb on the Dacia Logan
Dacia Logan (2012-2022 / MK 2) Follow the procedure for removing and replacing the third brake light and its bulbs on the Dacia Logan, as well as the Sandero. First, open the boot …
How to Change the Rear Light Bulb on a Dacia Logan
How to Change the Rear Light Bulb on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Here's how to replace the front light bulbs on a Dacia Logan. Lift the front bonnet. Using a screwdriver, remove the plastic cover that conceals the …
How to Replace the Ceiling Light Bulbs on a Dacia Logan
How to Replace the Ceiling Light Bulbs on a Dacia Logan
Dacia Logan (2012-2022 / MK 2) Learn how to replace the bulbs in the ceiling light of a Dacia Logan. Use a screwdriver to pry between the ceiling light cover and its perimeter (wit…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos