Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Replacing the front bulb on Dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Headlight bulb
Operation: Replacing the front bulb on Dacia Logan

Are the headlight bulbs burned out? Let's see the replacement on Dacia Logan. We open the front hood by pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We find the inspection cap of the headlight (located in the rear part of the headlight) and remove it. We disassemble the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We always install new bulbs of the same type and size as the old ones. We insert the lamp holder in the lighthouse housing. We close the headlight with plastic cover caps.


Posted on 3 December 2023 by ScegliAuto



How to replace the headlight bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) In this guide, we will see how to disassemble and replace the front headlight bulb of the Dacia Logan, following these simple steps. First, open the
How to replace the headlight bulb on the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the headlight bulb on the Dacia Logan, you need to open the hood to access the engine compartment and locate the circular cover o
How do you replace the third brake light bulb on your Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the third stop light bulb on your Dacia Logan, you need to open the tailgate, so that you can access the components located insid

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos