Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on the Dacia Logan 1

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Headlight bulb

Today, we will go through the steps necessary to remove and replace the front headlamp bulb on the first series Dacia Logan. First, open the bonnet and start by removing the plastic cover protecting the bulbs located behind the headlamp; then disconnect the electrical connector and unclip the metal spring to remove it, as shown in the video. At this point, replace the bulb with a new one of the correct type (in this case, an H4 bulb); simply insert it back into the headlamp and reassemble everything by following the reverse procedure!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Dacia Logan
How to replace the headlight bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) If you want to replace the front headlight bulb of your Dacia Logan on your own, all you need to do is read the following guide and follow the descri…
Replacing the Front Bulb on a Dacia Logan
Replacing the Front Bulb on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Are the front headlight bulbs blown? Let’s see how to replace them on a Dacia Logan. Open the front bonnet by pulling the lever located at the bottom…
How to Replace the Front Headlight Bulb of a Dacia Logan 2015
How to Replace the Front Headlight Bulb of a Dacia Logan 2015
Dacia Logan (2012-2022 / MK 2) If one of the front headlights of your Dacia Logan second series (2015 model) has a faulty bulb and you want to replace it yourself, follow the proce…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos