Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Dacia Logan

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Headlight bulb

This brief video tutorial shows how to replace the dipped beam bulb in the front headlamp of a first-generation Dacia Logan, produced from 2004 to 2012. First, open the bonnet. Then, remove the plastic cap behind the headlamp and disconnect the bulb connector. Next, take off the rubber dust cover and lower the tab that holds the bulb in place. Finally, remove the bulb and replace it with a new one, following the procedure in reverse. Perform the same operation on the other headlamp to complete the job.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Dacia Logan
How to replace the headlight bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) If you want to replace the front headlight bulb of your Dacia Logan on your own, all you need to do is read the following guide and follow the descri…
How to Replace the Front Headlight Bulb of a Dacia Logan 2015
How to Replace the Front Headlight Bulb of a Dacia Logan 2015
Dacia Logan (2012-2022 / MK 2) If one of the front headlights of your Dacia Logan second series (2015 model) has a faulty bulb and you want to replace it yourself, follow the proce…
How to Replace the Front Headlight Bulb on the Dacia Logan?
How to Replace the Front Headlight Bulb on the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) To replace the front headlight bulb on the Dacia Logan, open the bonnet to access the engine bay and locate the circular cover at the back of the cor…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos