Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Dacia Jogger

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Tail light

Today, I will explain how to replace the broken rear light on a Dacia Jogger. To remove the light, open the front bonnet and remove the side cover of the carpet. After performing these initial steps, you need to unfasten the screw that secures the light to the vehicle. Unscrew the three screws and the central nut using a 25mm Torx key, so you can extract the light. Pull the light outwards and disconnect the connector for complete removal. Connect the new light to the connector and insert the light back in. Secure the central locking screw using the Torx key and then screw in the three inner screws. Reposition the carpet and close the front bonnet.

Posted on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…
Where is the OBD2 port located on the Dacia Jogger 2022
Where is the OBD2 port located on the Dacia Jogger 2022
Dacia Jogger (2021-2026 / MK 1) Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side …
How the Blind Spot Warning Function Works in the Dacia Jogger
How the Blind Spot Warning Function Works in the Dacia Jogger
Dacia Jogger (2021-2026 / MK 1) The Dacia Jogger is equipped with a very useful driving assistance system known as blind spot detection. Its mechanism is quite simple: using sensors…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos