Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Vision 110
Part: Battery

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Honda Vision 110
How to replace the battery of the Honda Vision 110
Vision 110 The information provided in this guide will show us how to disassemble and replace the battery of the Honda Vision 110 scooter. First, we put the sco…
How to Replace the Variator on the Honda Vision 110?
How to Replace the Variator on the Honda Vision 110?
Vision 110 To replace the variator on the Honda Vision 110, loosen the screws securing the transmission cover panel. Once removed, you will be able to access th…
How do you replace the rear shock absorber of the Honda Vision 110?
How do you replace the rear shock absorber of the Honda Vision 110?
Vision 110 In order to replace the rear shock absorber of the Honda Vision 110, you need to loosen the appropriate screws that secure it to its housing, at the …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos