Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the Dacia Jogger 2022

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Checks and maintenance

Locating the OBD2 port on your Dacia Jogger (2022 model) is very simple, just follow the steps outlined in this guide. First, open the driver's side door, then enter the cabin and ensure your Dacia Jogger is turned off. Once these simple steps are completed, reach the lower area of the dashboard and locate the OBD2 port situated on the left side of the dashboard. Finally, you can connect a diagnostic tool to access the ECU data.

Posted on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Dacia Jogger?
How to Reset the Tyre Warning Light on a Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) If you own a Dacia Jogger and are wondering what the correct procedure is to complete the manual reset of the tyre warning light, just read the follo…
How do you replace the cabin filter of the Dacia Jogger?
How do you replace the cabin filter of the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) In order to replace the cabin filter of the Dacia Jogger, you need to completely remove the trim panel located on the side of the footwell from the f…
How do you reset the Service light on the Dacia Jogger?
How do you reset the Service light on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) It will be possible to completely make the Service light disappear from the Dacia Jogger instrument panel by first turning on the panel, inserting th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos