Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlight Bulb on a Dacia Sandero

Model: Dacia Sandero - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

We will briefly go through the steps and instructions to dismantle and replace the front headlight bulb on a Dacia Sandero. First, open the vehicle's bonnet and start by removing the plastic protective cover of the bulbs.

Then disconnect the electrical connector of the light by unfastening the metal clip to remove it, as shown in the video. Next, install the new dipped beam bulb of the correct type and with the same fitting; check the bulb's operation, and finally, refit the plastic cover.


Posted on 28 October 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlight Bulb on a Dacia Sandero
How to Change the Front Headlight Bulb on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) To replace the front headlight bulb on a Dacia Sandero, open the bonnet and access the rear of the affected headlight. Remove the rubber or plastic p…
How to Change the Headlight Bulb on a Dacia Sandero
How to Change the Headlight Bulb on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Here are the steps to remove and replace the headlight bulb on a Dacia Sandero. First, open the bonnet and start by removing the plastic cap found be…
How to Replace the Front Headlamp Bulb on a Dacia Sandero
How to Replace the Front Headlamp Bulb on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Replacing the front headlamp bulb on a Dacia Sandero is a straightforward task you can do yourself. Simply follow our tutorial and purchase a new bul…

Other guides you may be interested in

How to reset the brake wear warning light on the Ford Transit?

To reset the brake wear warning light on the Ford Transit, first replace the worn brake pads with new replacement parts. Once the replacement is complete, disconnect the wear sensor connectors to allow them to reset. Then reconnect all the connectors to ensure they can read the new wear values. Therefore, enter the cabin and turn on the instrument panel to verify that the brake pad wear warning light has been reset.

Watch the video!


by ScegliAuto

More videos