Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change an H4 Bulb on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Light bulb

Let’s see how to proceed with replacing an H4 bulb on a Dacia Sandero: Open the bonnet and locate the back of the headlamp where the connectors are present. Grip the three-pin connector typical of the H4 and pull it back to disconnect it. Remove the black elastic cover behind the headlamp that protects the bulb from dust and moisture. Inside, there is a spring grid holding it; move it to the left: once released, the clip will lift slightly. Gently pull the bulb out (be careful of the asymmetric pins). Insert the new bulb with the same orientation (do not touch the glass with your hands). Reposition the metal clip to lock it, replace the cover, and turn on the headlights, both main and dipped, to check their operation.

Posted on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulb on a Dacia Sandero
How to Change the Headlight Bulb on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Here are the steps to remove and replace the headlight bulb on a Dacia Sandero. First, open the bonnet and start by removing the plastic cap found be…
How to Change the Cabin Light Bulb on a Dacia Sandero Stepway 2
How to Change the Cabin Light Bulb on a Dacia Sandero Stepway 2
Dacia Sandero (2012-2020 / B8) This guide explains how to remove and replace the cabin light bulb on a second-generation Dacia Sandero, Stepway version, as well as on the Duster. F…
How to Replace the Front Bulb of a Dacia Sandero
How to Replace the Front Bulb of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before starting, open the front bonnet of your Dacia Sandero. Begin by removing the rear plastic cover of the bulb. By doing this, you will reach the…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos