Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to change the Dacia Sandero headlight bulb

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: Headlight bulb
Operation: How to change the Dacia Sandero headlight bulb

Let's see below the steps on how to disassemble and replace the Dacia Sandero headlight bulb, following the instructions below. First of all, we open the bonnet of our car and start removing the plastic cap that we find behind the front light; then we disconnect the electrical connector of the bulb and release the metal clip to remove the low beam bulb, as shown in the video. At this point we are going to replace the light with the new one, having the same attachment; then we put everything back together, applying the reverse procedure!


Posted on 18 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2012-2020 - Why don't the blinding lights of the Dacia Sandero work? Read Answer
    • Sandero 2008-2012 - How to replace the low beam bulbs on the Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos