Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part:

Resetting the tyre warning light on the Dacia Sandero is very simple. First, ensure the correct tyre pressure is restored, as indicated on the label inside the driver's door or in the manual. Start the engine and press the button on the right lever, which has three dots. Use this button to scroll through the display until you reach "Set TP". At this point, hold down the same button; the message will start to flash, and the warning light will disappear. When the message stops flashing, the reset is complete.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…
How to Reset the Tyre Warning Light on a Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) This video explains how to reset the tyre warning light on a new generation Dacia Sandero. The light is yellow and located at the bottom right of the…
How to Reset the Tyre Pressure Light on a Dacia Sandero
How to Reset the Tyre Pressure Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure light on a Dacia Sandero, first, get into the vehicle and close all four doors. Then, turn on the instrument cluster witho…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos