Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tyre Warning Light on a Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part:

In this tutorial, you will see how to remove the tyre warning light from the dashboard of the Dacia Sandero, a very simple operation that should only be performed after restoring the correct pressure in each tyre, for example, after a puncture. First, switch on the ignition, then scroll through the display screens with quick presses of the button at the end of the wiper control lever. Once you reach the "SET TP" screen, hold down the same button for about 10 seconds, or for as long as necessary for the light to disappear completely.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on a Dacia Sandero?
How to reset the tyre pressure warning light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repea…
How to reset the tyre pressure warning light on the Dacia Sandero?
How to reset the tyre pressure warning light on the Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) To reset the tyre pressure warning light on the Dacia Sandero, inflate all the tyres to the pressure indicated on the label on the driver's door. Onc…
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos