Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repeatedly press the button at the end of the lever to the right of the steering wheel until the display shows "Set TP". Next, press and hold the same button until the message stops flashing and the corresponding light disappears. If all tyres are at the recommended inflation pressure, the low pressure light will turn off permanently.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Dacia Sandero?
How to Reset the Tyre Pressure Light on the Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) In this tutorial, we will see how to reset the tyre pressure light on the Dacia Sandero, an extremely simple and quick operation to perform only afte…
How to Reset the Tyre Pressure Light on a Dacia Sandero Stepway?
How to Reset the Tyre Pressure Light on a Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure light on a Dacia Sandero Stepway, insert the ignition key and turn it to power up the instrument cluster. Next, press the …
How to Reset the Tyre Pressure Warning Light on a Dacia Sandero?
How to Reset the Tyre Pressure Warning Light on a Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) To completely eliminate the tyre pressure warning light on a Dacia Sandero, inflate the tyres until they reach the optimal pressure value: this value…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos