Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Tyre Pressure" Light on a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Warning light – error code

Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" option using the selection button located at the end of the right light switch. Once done, press and hold the selection button until the "Tyre Pressure" light turns off. After completing this step, you can release the button, successfully resetting the "Tyre Pressure" light on your Dacia Sandero.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) If you have just inflated or replaced the tyres on your Dacia Sandero and notice the warning light has come on, do not worry as you just need to perf…
Dacia Sandero (2021-2026 / MK 3) Resetting the tyre warning light on a Dacia Sandero, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, e…
Dacia Sandero (2012-2020 / B8) In this tutorial, you will learn how to reset the tyre pressure light on a Dacia Sandero, a very simple and quick operation, to be performed only aft…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where to find the Dacia Sandero car radio code? Read answer
    • Sandero 2021-2028 - What does the error code DF003 mean in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - What is the authentication code of the Dacia Sandero Stepway for? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos