Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Derbi GPR 125?

Model: Derbi Gpr 125
Part: Service warning light

Video tutorial

To reset the Service light on the Derbi GPR, you need to turn the key to switch on the instrument panel, noting that the letters GPR will appear. When these appear, press the MODE button located on the right knob of the bike until another screen appears on the bike's display.

You will need to enter the code 423, inputting the numbers using the MODE button. When the message "RES" appears, hold down the MODE button for a few seconds until the key icon disappears.

Once the operation is complete, you can switch off the instrument panel.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Derbi GPR 125
How to Reset the "Service" Light on a Derbi GPR 125
Gpr 125 Before you can start, sit on the seat of your Derbi GPR 125. Begin by activating the instrument panel by simply turning the key in the ignition switc…
How to Replace the Exhaust on a Derbi GPR 125?
How to Replace the Exhaust on a Derbi GPR 125?
Gpr 125 To replace the exhaust on a Derbi GPR 125, loosen the screws securing the exhaust terminal located near the rear wheel on the right side of the bike.…
How to Replace the Exhaust on the Derbi GPR 125?
How to Replace the Exhaust on the Derbi GPR 125?
Gpr 125 You can replace the exhaust on the Derbi GPR 125 by loosening the screws that secure the exhaust end can to its housing, located near the rear swinga…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos