Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Nitro
    4. : Brake discs

Dodge Nitro - Brake discs

Dodge Nitro (2006-2011 / MK 1)
Replacement discs and front pads
Once the car has been raised on the bridge, remove the front wheel and the fixing pins of the caliper and, before removing it, pry between the caliper and the …read all…
Posted on 3 August 2023 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Brake Disc Removal Guide
The following guide shows how to perform the brake disc replacement operation without having to take the car to the mechanic. First of all you have to remove …read all…
Posted on 2 August 2023 by ScegliAuto
Car stereo (1) Key (1) -board computer (1) Brake discs (2) Tail light (1) Headlight bulb (1) Engine oil (1) Fuse box (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos