Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Nitro
    4. : Steering wheel

Dodge Nitro - Steering wheel

Dodge Nitro (2006-2011 / MK 1)
How to disassemble the airbag and steering wheel of a Dodge Nitro.
Today we will see the main instructions that will allow us to disassemble and replace the airbag and steering wheel of the Dodge Nitro, following these simple …read all…
Posted on 14 August 2023 by ScegliAuto
Car stereo (1) Key (1) -board computer (1) Brake discs (2) Tail light (1) Headlight bulb (1) Engine oil (1) Fuse box (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos