Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dodge
  4. : Nitro

Dodge Nitro - Video guides

Dodge Nitro (2006-2011 / MK 1)
Where Are the Fuse Boxes on a Dodge Nitro?

The Dodge Nitro, produced from 2006 to 2011, has a fuse box that contains both small and medium to large amperage fuses. The box is located under the front …Read all…
Posted on 10 February 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
How to Replace the Key Battery of the Dodge Nitro

If you want to replace the battery located inside your Dodge Nitro key yourself, simply follow the instructions outlined in this guide. First, obtain a flat …Read all…
Posted on 5 September 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
How to Remove the Airbag and Steering Wheel from a Dodge Nitro

Today, we will go through the main instructions to remove and replace the airbag and steering wheel of a Dodge Nitro by following these simple steps. First, …Read all…
Posted on 12 August 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
How to Reset the Oil Change in a Dodge Nitro

In this video tutorial, see how to reset the oil change in a Dodge Nitro by following some simple steps: the first thing to do is maintain the vehicle, such as …Read all…
Posted on 1 September 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Where are the Fuses in a Dodge Nitro?

The fuses in a Dodge Nitro are located inside the fuse box. In this model, there is a single box: it is situated in the engine compartment, on the driver's …Read all…
Posted on 3 July 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
How to Replace the Rear Light of the Dodge Nitro?

To remove the rear light of the Dodge Nitro, open the boot and remove the fixing rivets located on the side of the light, near the seal. Once the rivets are …Read all…
Posted on 11 June 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Removing Front Headlamp Bulb on Dodge Nitro

In this video tutorial, you will learn how to replace the burnt-out front headlamp bulb on a Dodge Nitro! To remove it, first, open the bonnet: locate the …Read all…
Posted on 12 April 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Replacing Front Discs and Pads

Once the vehicle is raised on the ramp, remove the front wheel and the caliper mounting bolts. Before removing the caliper, lever between the caliper and pads …Read all…
Posted on 18 February 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Guide to Removing Brake Discs

The following guide shows how to replace the brake discs without needing to take the car to a mechanic. First, remove the wheel and lift the car with a jack. …Read all…
Posted on 17 February 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Engine Oil and Oil Filter Replacement

To replace the engine oil, unscrew the drain plug located under the oil sump after positioning a container to collect the oil; once the draining is complete, …Read all…
Posted on 15 February 2026 by ScegliAuto
Dodge Nitro (2006-2011 / MK 1)
Dashboard and Radio Removal

Using a plastic tool to avoid damaging the bodywork, lever at the sides of the climate control panel to release the plastic clips and remove it. Still using a …Read all…
Posted on 5 February 2026 by ScegliAuto

See also:

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos