Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of the Dodge Nitro?

Model: Dodge Nitro MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

Video tutorial

To remove the rear light of the Dodge Nitro, open the boot and remove the fixing rivets located on the side of the light, near the seal. Once the rivets are extracted, you can pull the light from its housing and completely remove it by disconnecting the connector at the rear.

After the old light has been removed, replace it with a new part: connect it to the connector and insert it back into its housing.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Dodge Nitro
How to Replace the Key Battery of the Dodge Nitro
Dodge Nitro (2006-2011 / MK 1) If you want to replace the battery located inside your Dodge Nitro key yourself, simply follow the instructions outlined in this guide. First, obtain…
Where are the Fuses in a Dodge Nitro?
Where are the Fuses in a Dodge Nitro?
Dodge Nitro (2006-2011 / MK 1) The fuses in a Dodge Nitro are located inside the fuse box. In this model, there is a single box: it is situated in the engine compartment, on the dr…
Removing Front Headlamp Bulb on Dodge Nitro
Removing Front Headlamp Bulb on Dodge Nitro
Dodge Nitro (2006-2011 / MK 1) In this video tutorial, you will learn how to replace the burnt-out front headlamp bulb on a Dodge Nitro! To remove it, first, open the bonnet: locat…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos