Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light of the Dodge Journey - Fiat Freemont

Model: Dodge Journey MK 1 - Years 2008-2020
Part:

In this short guide, we will see how to disassemble and replace the third brake light, also replacing the lights, of the Dodge Journey, but also of the Fiat Freemont. First, move to the rear and start unscrewing the two fixing screws found on the side of the third brake light; remove it and disconnect the electrical connector of the lights found on the back, as shown in the video. At this point, replace any faulty lights, replacing either the entire third brake light; connect the headlight and secure it again with the screws!

Posted on 13 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Dodge Journey and Fiat Freemont
Replacing the Diesel Filter on a Dodge Journey and Fiat Freemont
Dodge Journey (2008-2020 / MK 1) .. the diesel filter on a Dodge Journey and a Fiat Freemont. First, open the bonnet and locate the filter, then unscrew the central lever that you.. …
How to reset the service light on the Dodge Journey/Fiat Freemont
How to reset the service light on the Dodge Journey/Fiat Freemont
Dodge Journey (2008-2020 / MK 1) .. light on the Dodge Journey (or its twin, the Fiat Freemont) after performing an oil change and it's time to reset the light so it doesn’t illuminate a.. …
Removing Cigarette Lighter from Dodge Journey - Fiat Freemont
Removing Cigarette Lighter from Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) .. steps, a procedure that is identical for the Fiat Freemont, as they are practically the same vehicle. First, get inside the car and remove any plastic.. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos