Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery of the Dodge Journey - Fiat Freemont key remote.

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

These short and simple instructions will show us how to disassemble and replace the battery of the key remote for the Dodge Journey, as well as the Fiat Freemont. First, we take our remote and begin to remove the physical key from inside it; then we pry open the slot created with something thin and sharp, thus accessing the battery compartment, as shown in the video.

At this point, we remove and replace the battery with a new one of the correct type (in this case a CR 2032 3V); we insert it in the correct direction and reassemble the remote casing!


Posted on 11 February 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Motor on a Dodge Journey - Fiat Freemont
How to Replace the Rear Wiper Motor on a Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) Today's steps will show you how to remove and replace the rear wiper motor on a Dodge Journey, as well as on a Fiat Freemont. First, open the tailgat…
Replacing the Diesel Filter on a Dodge Journey and Fiat Freemont
Replacing the Diesel Filter on a Dodge Journey and Fiat Freemont
Dodge Journey (2008-2020 / MK 1) In today's tutorial, we will see how to remove and replace the diesel filter on a Dodge Journey and a Fiat Freemont. First, open the bonnet and locat…
How to replace the battery in the remote control of the Dodge Journey.
How to replace the battery in the remote control of the Dodge Journey.
Dodge Journey (2008-2020 / MK 1) Our short video tutorial shows you how to replace the battery in the Dodge Journey car remote. We move the button on the remote to remove the metal e…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos