Do it yourself
Frequently asked questions about cars and motorcycles

Battery Replacement on Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Battery

How to remove the battery on a Dodge Journey. Let's see carefully how to do it. In this car the battery is not located in the engine compartment but in the front bumper (left side). The first step to perform. We loosen the pins of the rim, lift the car on a column bridge and remove the wheel (for convenience), then with a screwdriver we go to unscrew the screws of the internal plastic wheel stone guard (front left side). Now unscrew the tightening pins of the battery terminals with a special socket wrench. We insert the new battery in the housing and reconnect the clamps (we tighten all the pins of the stone guard. Finally we reassemble the circle.


Posted on 28 November 2023 by ScegliAuto



How to change the battery of a Dodge Journey
Dodge Journey (2008-2020 / MK 1) Replacing the battery of a Dodge Journey? Let's see the disassembly of the battery. We lift the car with a jack, remove the left front wheel. We will
How to replace the rear taillight in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) As we can see in this tutorial, replacing the rear taillight in the Dodge Journey is an extremely simple and fast operation. First of all, make sure
Where is the front wiper fuse located in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) In the event that the wipers of our Dodge Journey suddenly stop working, we can first of all check the state of the respective fuse whose location is

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos