Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : How to remove the front bumper of a Dodge Charger

Dodge Charger - Video tutorial

Model: Dodge Charger LX - Years 2006-2011
Part: Front bumper
Operation: How to remove the front bumper of a Dodge Charger

Do you want to replace the front bumper of a Dodge Charger? Let's see how to proceed in this video. Let's lift the bonnet and put it in safety. With a plastic spatula, we remove the fastening rivets of the bumper placed in the upper part. Once the aforementioned operation has been carried out, we detach the stone guard rivets placed on the wheels and finally remove the pins placed around the perimeter of the bumper. We remove the bumper from the car body by hand. To proceed with the assembly, let's fix the bumper as in the video and proceed to tighten all the screws both around the stone guard and around its perimeter. - Socket wrench - Screwdriver - Plastic spatula.


Posted on 30 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos