Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal Instructions

Model: Dodge Charger LX - Years: 2006, 2007, 2008, 2009, 2010, 2011
Part: Front bumper

See other generations:
Video tutorial

To comfortably remove the front bumper, it is recommended to lift the vehicle on suitable axle stands and remove the front wheels, as the plastic wheel arch liners must be removed to access the bumper. Begin by opening the front bonnet and removing the plastic cover between the bumper and the slam panel.

Next, remove the wheel arch liners by disconnecting the speed sensor connector to unscrew the bumper's fixing bolt at the edge of the wing. Finally, detach the front indicator light and remove the push clips along the upper edge to complete the removal.

Once the bumper is off, you can also remove the grille from inside by unscrewing the fixing screws and disengaging the retaining tabs.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Indicator Stalk
Instructions for Replacing the Indicator Stalk
Dodge Charger (2011-2023 / LD) If the indicator stalk lever does not function correctly, you will need to replace the entire unit by retrieving the antagonist ring where the flat s…
How to Remove the Front Bumper of a Dodge Charger
How to Remove the Front Bumper of a Dodge Charger
Dodge Charger (2006-2011 / LX) Want to replace the front bumper of a Dodge Charger? Follow this guide. Lift the bonnet and secure it. Using a plastic trim tool, remove the retainin…
Radiator Fan Removal Instructions
Radiator Fan Removal Instructions
Dodge Charger (2006-2011 / LX) The cooling fans are mounted on a support frame located just behind the radiator and secured with two upper side pins, while the lower part has plast…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos