Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Indicator Stalk

Model: Dodge Charger LD - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Steering wheel

See other generations:
Video tutorial

If the indicator stalk lever does not function correctly, you will need to replace the entire unit by retrieving the antagonist ring where the flat spiral is located; you must then remove the steering wheel, starting with the airbag removal: behind the spokes of the steering wheel, there are holes through which to insert the key to unscrew the airbag mounting screws; then proceed to remove the steering wheel fixing pin and extract the steering wheel while ensuring the antagonist ring does not open or rotate; at this point, you can proceed to dismantle the indicator controls by unscrewing the support clip screw and then reverse the process for installing the new one.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Alternator Replacement Instructions
Alternator Replacement Instructions
Dodge Charger (2006-2011 / LX) If the battery warning light remains on after starting the engine, it is likely that the alternator is damaged and no longer charges the battery: che…
Instructions for Replacing Rear Light
Instructions for Replacing Rear Light
Dodge Charger (2006-2011 / LX) Replacing the rear light is very simple and quick to perform and does not require any tools; first, ensure the new part is compatible: the new light …
How to Remove the Front Headlights from a Dodge Charger?
How to Remove the Front Headlights from a Dodge Charger?
Dodge Charger (2006-2011 / LX) This guide provides instructions for removing and replacing the front headlights on a Dodge Charger in simple steps. First, open the bonnet of the ve…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos