Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the 2017 Dodge Caravan?

Model: Dodge Caravan MK 5 - Years 2008-2020
Part: Front bumper

This video shows the exact procedure to follow for removing the front bumper on a 2017 Dodge Caravan. First, release the hood latch by pulling the lever inside the cabin, then lift the hood and secure it. Next, remove the two plastic clips and the various screws located at the top of the bumper and in the wheel well. Grasp the bumper with your hands and pull it away from the vehicle, being careful not to yank it too hard to avoid damaging the wiring. Complete the process by disconnecting the connectors.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Dodge Caravan located?
Where is the fuse box of the Dodge Caravan located?
Dodge Caravan (2008-2020 / MK 5) The 2016 Dodge Caravan has a fuse box inside. The fuse box is installed inside the front hood, specifically next to the vehicle's battery. To replace…
How to Replace the Cabin Filter in a Dodge Caravan
How to Replace the Cabin Filter in a Dodge Caravan
Dodge Caravan (2008-2020 / MK 5) To replace the cabin filter in a Dodge Caravan, open the glove compartment located on the passenger side. This allows you to detach the retaining pin…
How to Replace the Key Battery in a Dodge Grand Caravan
How to Replace the Key Battery in a Dodge Grand Caravan
Dodge Caravan (2008-2020 / MK 5) If your Dodge Grand Caravan key is no longer working and you need to replace the battery inside, just follow the steps described below. First, press …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos