Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Dodge Journey/Fiat Freemont

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

In this guide, learn how to reset the service light on the Dodge Journey (or its twin, the Fiat Freemont) after performing an oil change and it's time to reset the light so it doesn’t illuminate again. First, turn on the ignition without starting the engine, then press the accelerator pedal fully three times.

Next, turn off the ignition and wait a moment before turning it back on. When you do, the engine oil light will be off and will not bother you again until the next service. Check the owner's manual for the next service interval.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont
Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) In this video tutorial, you will see the main instructions on how to remove the cabin fan motor of a Dodge Journey and a Fiat Freemont, following the…
Replacing the Diesel Filter on a Dodge Journey and Fiat Freemont
Replacing the Diesel Filter on a Dodge Journey and Fiat Freemont
Dodge Journey (2008-2020 / MK 1) In today's tutorial, we will see how to remove and replace the diesel filter on a Dodge Journey and a Fiat Freemont. First, open the bonnet and locat…
Removing the central console from a Fiat Freemont-Dodge Journey
Removing the central console from a Fiat Freemont-Dodge Journey
Dodge Journey (2008-2020 / MK 1) In this video tutorial, you will see how to remove the central console from a Dodge Journey, as well as a Fiat Freemont, in simple steps. First, get …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos