Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on a Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Engine oil

Change the used oil on a Dodge Journey, including the filter. Lift the car on a column lift and unscrew the bolt from the oil sump, allowing the oil to drain into a plastic container, and tighten the bolt afterwards. Lower the car and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, securing it. Using a socket wrench, unscrew the oil filter (as shown in the video), remove it, and fit a new one, ensuring it adheres well around the container. Remove the cap on the engine head and top up the engine.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Dodge Journey
How to replace the engine oil and oil filter of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) These simple steps will show us how to perform the routine maintenance check, replacing the engine oil and oil filter, of the Dodge Journey, but also…
How to reset the oil light on the 2018 Dodge Journey
How to reset the oil light on the 2018 Dodge Journey
Dodge Journey (2008-2020 / MK 1) When the service light comes on in a Dodge vehicle, it means that it is necessary to perform a car service. The service includes changing the engine …
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos